Tools/tablesaw

From rLab Wiki
Jump to navigationJump to search

Record Power TS250-C Table Saw


This page has been noted as requiring attention to bring it up to the basic standard as per the guidance

Please remove this tag once this page has been improved that standard


This tool requires induction
Inductionrequired.svg
Owing to it's dangerous nature, delicate nature, or expense, this tool requires that you be inducted on it's proper handling before use.

Introduction

Record Power TS250-C Table Saw

The Manual for the tablesaw is here. The table saw requires induction before you use it for the first time.

Current Status

Date Status Comment
2nd February 2019 Functional

Planned Upgrades

Parts and upgrades that are planned/Budgeted/Purchased for in the near future


Record Power TS250-C Table Saw

Inductions

The following people are able to provide inductions on the Record table saw

Name/Contact Notes
Steve-R
Mark-M

Maintainers

These are the people who look after and repair the Record table saw, they're the ones to contact if there's any problems with it

Name Notes
Steve-R

Recent Changes

If you make any non-trivial changes to the Record table saw or perform maintenance please note it here, delete records older than 1 yr

  • Replaced blade Padski (talk) 20:55, 24 November 2021 (UTC)
  • Fix blade lock mechanism by making a new lever Stever (talk) 11:54, 27 September 2021 (BST)
  • Clean and wax table Jmf (talk) 11:10, 7 August 2021 (BST)
  • Replace split section of extractor hose, replace paper filter element in dust extractor Stever (talk) 14:04, 15 July 2021 (BST)
  • Clean and wax table Stever (talk) 18:58, 28 May 2021 (BST)
  • Changed blade, Adjusted sliding table for chopping, Adjusted and straightened up side block for slicing, Dismantled and cleaned out blocked dust extractors, Adjusted and cut underlaying plastic blade/dust guard to fit, Changed plug fuse in combined power supply. Vidar Velle March 8th 2020
  • Fitted double socket to allow proper use of dust extract Jmf (talk) 08:01, 7 July 2019 (UTC)
  • Readjusted the sliding table. Vidar Valle 15th Feb 2018